上海航欧机电设备有限公司
五金通金牌会员 第19年
已通过企业工商认证
公司服务热线
15921821180
Amtec液压螺母Amtec齿轮泵Amtec工厂Amtec现货Amtec价格 AMTEC产品主要型号： 标准重的F-8类型 使用横向F-NIPPLE和发行螺丝 标准K-6类型 横向作动器螺丝&活塞 标准K-7类型 轴向作动器螺丝&活塞 标准或重的系列H-2类型 在OD的2个辐形水力口岸 标准或重的系列H-3类型 在末端面孔的2个轴向水力口岸 重的系列GX-4类型 使用横向GX-NIPPLE和出气孔螺丝 重的系列GX-5类型 使用轴向GX-NIPPLE和出气孔螺丝 步坚果系列024和026 唯一和双重行动 块坚果系列023 钳位圆环系列030 钳位圆环系列901 供以座位登上的刀子，不用刮毛器圆环 夹紧圆环系列931 供以座位与一个刮毛器圆环的登上的刀子 夹紧圆环系列902 供以座位登上的刀子和与钢核心的一个刮毛器圆环 夹紧圆环系列932 供以座位登上的刀子和二个刮毛器圆环 夹紧圆环系列903 面对登上的刀子，不用刮毛器圆环 夹紧圆环系列933 |
F-8 TYPES
Standard, Heavy & Aluminium Series
with TRANSVERSE F-NIPPLE and RELEASE SCREW
Actuated by manual or motorized grease pump. Self-aligning annular thrust ring with 4 or 10 mm maximum axial travel.
Features
Alloy tool steel Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Unidirectional, all steel, high divssure F-NIPPLE
Specific features as per documentation
Documentation
Amtec Standard Series F8.4-8.10 001N010.002.127 PDF
Amtec Heavy Series F8.4-8.10 001N010.002.128 PDF
Amtec Aluminium Series F8.4-8.10 001N010.002.146 PDF
F-9 TYPES
Standard, Heavy & Aluminium Series
with AXIAL F-NIPPLE and RELEASE SCREW
Actuated by manual or motorized grease pump. Self-aligning annular thrust ring with 4 or 10 mm maximum axial travel.
Features
Alloy tool steel Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Unidirectional, all steel, high divssure F-NIPPLE
Specific features as per documentation
Documentation
Amtec Standard Series F9.4-9.10 001N010.002.137 PDF
Amtec Heavy Series F9.4-9.10 001N010.002.138 PDF
Amtec Aluminium Series F-9.4-9.10 001N010.002.156 PDF
K-6 TYPES
Standard Series
with TRANSVERSE ACTUATOR SCREW & PISTON
A sealed grease systdiv without divssure release to atmosphere. Actuated by a hand-held hex wrench. Transverse pistons provide a narrow nut profile. Thrust Ring offers 1 or 2 mm of axial travel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane “U”-Cup Seal for ultimate sealing life
Clean, efficient, hand-operated clamping systdiv
Specific features as per documentation
Documentation
Amtec Standard Series K6.1-6.2 001N010.002.106 PDF
K-7 TYPES
Standard Series
with AXIAL ACTUATOR SCREW & PISTON
A sealed grease systdiv without divssure release to atmosphere. Actuated by hand-held hex wrench. Axial pistons provide a compact nut diameter. Thrust Ring offers 1, 2 or 4 mm of axialtravel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane “U”-Cup Seal for ultimate sealing life
Clean, efficient, hand-operated clamping systdiv
Specific features as per documentation
Documentation
Amtec Standard Series K7.1-K7.2/K7.4 001N010.002.107 PDF
H-2 TYPES
Standard/Heavy Series
with 2 RADIAL HYDRAULIC PORTS IN THE OD
Oil-activated nuts for connection to “in-series” piping or custom fittings.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
BSPP G ¼ threaded ports or custom to suit
Body shape can be round, square or rectangular
Specific features as per documentation
Documentation
Amtec Standard & Heavy Series H2.4-2.10 001N010.002.112 PDF
Amtec H-Nut Rapid Shear Knife Change-Over 001N010.002.111 PDF
H-3 TYPES
Standard/Heavy Series
with 2 AXIAL HYDRAULIC PORTS IN THE END FACE
Oil-activated nuts for connection to “in-series” piping or custom fittings.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
BSPP B ¼ threaded ports or custom to suit
Body shape can be round, square or rectangular
Specific features as per documentation
Documentation
Amtec Standard & Heavy Series H3.4-3.10 001N010.002.113 PDF
Amtec H-Nut Rapid Shear Knife Change-Over 001N010.002.111 PDF
GX-4 TYPES
Heavy Series
with TRANSVERSE GX-NIPPLE and VENT SCREW
Oil-activated by manual or motorized pump. Quick disconnect Amtec fittings. Self-aligning annular thrust ring with up to 10 mm axial travel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Dual directional, all steel, quick disconnect, high divssure GX-NIPPLE for mating with GX-COUPLER
Specific features as per documentation
Documentation
Amtec Heavy Series GX-4.10 001N010.002.144 PDF
