北京蓝翔恒达焊材有限公司
五金通金牌会员 第15年
已通过企业工商认证
公司服务热线
15901248886
瑞典伊萨OK Autrod 5183铝合金焊丝ER5183铝镁焊丝?OK Autrod 5183GMAWOK Autrod 5183 is designed to provide the highest possible strength in the as-welded condition of alloy AA 5083 and similar high-magnesium alloys. The more common OK Autrod 5356 typically fails to meet the as-welded tensile requirements of AA 5083. The alloy is typically used in marine and structural applications where high strength, high fracture toughness for impact resistance and exposure to corrosive elements are important. The alloy is not recommended for elevated temperature applications due to its susceptibility to stress corrosion cracking. The alloy is non-heat treatable.
Welding current
DC(+)
ClassificationsApprovalsTypical all weld metal composition, %Typical mech. properties all weld metalSFA/AWS A5.10ER5183EN ISO 18273S Al 5183 (AlMg4,5Mn0,7(A))JIS Z 3232A5183ABSER5183 (For lots starting with RB)BVWCCEEN 13479ClassNKKAl5RCG(I-1)(I-4) (For lots starting wiCWBAWS A5.10DB61.039.03DNV5183GLRAlMg4.5mNLRWC/I-1VdTüV04666Si0,40Mn0,8Cr0,15Cu<0,10Ti<0,15Zn<0,25Fe<0,40Mg4,8Wire compositionYield stress, MPa
125
Tensile strength, MPa
275
Elongation, %
17
Elongation, %
17
?
Diameter, mm0.81,01,21,62,4Arc voltage, V13-2415-2620-2925-3026-31Welding current, A60-17090-210140-260190-350280-400
