河北会泉泵业有限公司
五金通钻石会员 第13年
已通过企业工商认证
公司服务热线
13582138818
高压多X泵@南京高压多X泵@高压多X泵
In order to citation phenomenon, in the manufacture of pump impeller material should be used as far as possible to use anti-corrosion materials, increase the corrosion resistance of the pump. In the installation, should minimize the pump inlet resistance, choose the appropriate inhalation height, reasonable operation, correct adjustment and so on. The volume loss of centrifugal pump has the leakage loss of seal ring, the leakage loss of the equilibrium mechanism and the leakage loss between the class.
GC型泵系、单吸多X、分段式离心泵。具X率高、性能范围广、运行平稳、噪音低、寿命长、安装方便等特点。供输送清水或物理化学性质类似于水的其它之用。wjhuiquan3.6
本司产品全部采用计算机设计和处理，公司拥有雄厚的技术力量、丰富的生产和完善的检测手段，从而保证产品的可
二、适用范围：
适用于工业和城市给排水、高层建筑增压供水，园林喷灌、消防增压、远距离送水、采暖、等冷暖水循环增压及设备配套等，尤其适用于小型锅炉给水。
三、产品特点：
1、水力模型X，效率高，性能范围广。
2、泵运行平稳，噪音低。
3、轴封采用软填料密封，可靠、结构简单，方便快捷。
四、技术参数：
流量：5 -55m3/h；
扬程：46-301m；
功率：3-75KW；
转速：2950r/min；
口径：φ40-φ100；
温度范围：≤110℃；
工作压力：≤2.7Mpa。
高压多X泵@南京高压多X泵@高压多X泵
2) The shaft 〈9〉 fitted with the bushing armor 〈5〉 and the key is passed through the inlet section 〈8〉 and pushed into the impeller (10), supplemented with a paper pad on the middle section, fitted with a middle section (11), and then pushed into the second impeller, repeating the above steps to complete all the impeller and the middle section. 3) the Balance ring (14〉, mounted on the (13〉 of the effluent section.
五、型号意义：
2.5GC 6×5
2.5 –口直径（吋）
GC –分段式锅炉给水泵6 –缩小为1/10泵的比转数5 –叶轮X数
高压多X泵@南京高压多X泵@高压多X泵
2) The shaft 〈9〉 fitted with the bushing armor 〈5〉 and the key is passed through the inlet section 〈8〉 and pushed into the impeller (10), supplemented with a paper pad on the middle section, fitted with a middle section (11), and then pushed into the second impeller, repeating the above steps to complete all the impeller and the middle section. 3) the Balance ring (14〉, mounted on the (13〉 of the effluent section.
会泉公司采用，并X的实施，自创办以来始终把作为追求目标，发扬拼搏精神，争创的精神在泵阀行业中不断发展。
