河北会泉泵业有限公司
五金通钻石会员 第13年
已通过企业工商认证
公司服务热线
13582138818
工程自吸泵@利州工程自吸泵水泵展会?
被叶轮循环加入气液分离室，此反复直至吸程管路中的空气被排尽，介质被输送到工况所需要的任意场所。自吸
自吸泵是指不需在管路内充满水就能自动地把水抽上来的离心泵。自吸泵启动的时候不需要加水，其自身的叶轮就可以做到，且叶轮的密封间隙越大，其自吸的高度反而越低。自吸泵具有结构紧凑、操作方便、运行平稳、容易、效率高、寿命长，并有较强的自吸能力等X点。管路不需安装底阀，工作前只需保证泵储有定量引液即可。不同可采用不同材质自吸泵。自吸泵在日常使用中，常见的问题有上水时间较长、量较小等。
ZW型自吸泵是根据有关技术资料经吸收、消化、改进后研制而成的节能泵类产品。该泵属自吸式离心泵，它具有结构紧凑、操作方便、运行平稳、方便、效率高、寿命长、并有较强的自吸能力等X点。管路中不需安装底阀，工作前只需保留泵储有定量引液即可，因此简化了管路，以了劳动条件。wjzixibeng3.29
主要用途：
2、装上摇臂式喷头，又可将水冲到空中后，散成雨滴进行喷雾，是农场、苗圃、果园、茶园的良好机具。
3、适用于清水、海水及带有酸、碱度的化工介质和带有一般糊状的浆料（介质粘度≤100厘珀、含固量可达30%以下）。
4、可和任何型号、规格的压滤机配套使用，将浆料送给压滤机进行压滤的配套泵种。
工程自吸泵@利州工程自吸泵水泵展会?
The points for attention of the pump are that the mechanical seals are applied to the medium of the suspended particles when they are applied to factories. Dismantling mechanical seals should be careful, not allowed to hammer with hammer, iron and other percussion, so as not to destroy the dynamic and static ring sealing surface. If dirt is not removed, we should try to remove dirt and wash it before removing it, so as not to damage the sealing element. Before installing mechanical seals, check whether all sealing elements are invalid or damaged. If so, they should be repaired or replaced. We should strictly check the relative friction sealing surface between the moving ring and the static ring, and do not allow any slight scratches, scratches and other defects. All parts, including the pump body, impeller and sealing city, should be rinsed before assembly, especially the dynamic and static ring ends. They should be cleaned with clean, soft cloth or cotton yarn.
ZW型自吸式无堵塞排污泵，是根据ZX型自吸离心泵及QW型潜水排污泵的结构及性能，借鉴国外同类产品之X点，研制而成的集自吸及排污于一身的新型泵种。既可象一般清水自吸泵那样不需安装底阀，不需灌引水，又可抽吸含有大颗粒固体直径为出口口径的60%和纤维长度为叶轮直径1.5倍的污物、沉淀物、废矿杂质、粪便处理及一切工程污水物和胶质，完全减轻人力的劳动强度，而且安装使用方便，极少，性能达到X水平，具有广阔的应用市场和发展前景。
工程自吸泵@利州工程自吸泵水泵展会?
产品特点：
1、排污能力强：特殊的叶轮防堵设计，确保了泵且无堵塞。
2、节能：采用水力模型，效率比一般自吸泵高3～5%。
3、自吸性能好：自吸高度比一般自吸泵高1米，且自吸时间更短。
产品用途：
ZW型自吸式无堵塞排污泵适用于化工、石油、制药、采矿、造纸、纤维、浆料、纺织、食品、电厂及市政排污工程、公共设施排污、河塘养殖等行业。
技术参数：
流量：5-800m3/h；
扬程：12-60m；
电机功率：2.2-55KW；
转速：1450-2900r/min；
口径：φ25-φ300；
介质温度：≤100℃；
自吸高度：4.5-6.0m。
Then apply a layer of clean grease or oil. In the assembly, we should pay attention to eliminating deviation. When fastening screws, we should tighten evenly, oid deviation and seal failure. When adjusting the comdivssion of the spring correctly, when the pump is installed, when the rotor is rotated by hand, the sealing spring should be felt to he a certain amount of comdivssion, and it can move smoothly and flexibly without the feeling of biting. If it feels too tight or does not move, it should be loosely adjusted. Before starting, the cooling water should be opened first, so that the sealing city is filled with sealing fluid. When parking, stop the pump first and then close the sealed cooling water. The self-priming pump has the characteristics of automatic suction. Besides the first use, it is necessary to pump the liquid into the pump. When it is started again, it can be automatically sucked on without the priming fluid. It is easy to operate and reliable when it is used. The design divssure of the pump is 16bar, and the temperature of the conveying medium is -20 ~ +150 C. Widely used in chemical, fertilizer, metallurgy, petrochemical, paper, food, synthetic fiber and other industrial sectors to transport corrosive or non polluting media without solid particles.
具有雄厚的产品才能，运用核算机CAD，CAPP进行产品及工艺的辅助规划，具有完善的确保体系，推广的办理战略。工厂面积15000平方米。矿山，电力，煤炭，疏浚，石油化工，保护工程，建材，火电烟气脱硫，污水处理，城市工厂给排水，农业灌溉等许多范畴。我公司具有X的模型，铸造，铸造，焊接，机加工，热处理，装置。渣浆泵，砂砾泵，脱硫泵，泥浆泵整机3000台会泉泵业是您佳挑选，咱们以X异的产量，X的效劳与您共创光辉明日。污水泵，泥浆泵，管道泵，潜水泵，清水泵，压滤机配套泵，大流量双吸泵，砂砾泵，杂质泵及操控设备的企业。公司的产品均依照规范，消化吸收技能，自行规划，自主制作。
